Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
transporters are designed to hold a specific volume of material which needs to be conveyed. They are sized appropriately for application specific system performance with regard to conveying distance, conveying rate, conveying velocity and air efficiency. The 60 degree cone bottom on the transporters and the 45 degree cone bottom on the transporters provide a better cleanout to achieve optimum efficiency. They are generally designed for higher conveying pressures (over 15 psig) and so that granular materials can be fed more uniformly into the conveying line for predetermined performance values.
Maximum efficiency
Propriety air injection nozzles, complete with volume and pressure control, allow only the appropriate amount of compressed air to be added to the transporter as needed for conveying. They are designed to create a controlled and effective discharge for trouble-free conveying and better material-to-air ratios for maximum efficiency and improved reliability.
General Features
Rotating outlet fitting Air injection nozzles
60 or 45 degree cone bottom
A.S.M.E./PED certified
National Board certified
Low maintenance
Few moving parts
Quiet operation
Heavy-duty construction
Maximum efficiency
Propriety air injection nozzles, complete with volume and pressure control, allow only the appropriate amount of compressed air to be added to the transporter as needed for conveying. They are designed to create a controlled and effective discharge for trouble-free conveying and better material-to-air ratios for maximum efficiency and improved reliability.
General Features
Rotating outlet fitting Air injection nozzles
60 or 45 degree cone bottom
A.S.M.E./PED certified
National Board certified
Low maintenance
Few moving parts
Quiet operation
Heavy-duty construction
Address:
288th,Hengyun North Road, Hengxi Town, Jiangning District, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Health & Medicine, Manufacturing & Processing Machinery
Main Products:
Srcrew Pump, Air Conveying, Solid Transport
Company Introduction:
We design the pneumatic conveying system and make the conveying components. The pneumatic conveying system are considered, such as the type of material used, conveying distance, system constraints including feeding and discharging, health and safety requirements, and the need for continuous or batch conveying.
Specializes in pneumatic conveying of dry bulk solids materials for the processing industries.
Some common solids as flour, sugar, cement and many more, can be suspended and transported in air - referred as pneumatic conveying. A pneumatic conveying system may transport solids up to approximately 50 mm size. The powder or solid must be dry, with no more than 20% moisture and not sticking.
In a pneumatic conveying system, most of the energy is used for the transport of the air itself. The energy efficiency of a pneumatic conveying plant is therefore relatively low, but this is often outweighed by easy handling and, in well designed systems, dust free solutions.
In general the length of a pneumatic system should not extend 300 m for each pneumatic unit. The products can be conveyed over long distances by connecting the systems in series.
There are three basic designs of pneumatic transport systems:
Dilute phase conveying at a high gas speeds (20 - 30 m/s)
Strand conveying at a limited gas speeds (15 - 20 m/s)
Dense phase conveying at a low gas speeds (5 - 10 m/s)
Pneumatic systems can operate with both positive and negative pressures - vacuum. The working pressure should not extend 40 kN/m2.
The maximum temperature rise during pneumatic compression is seldom above 5oC, which makes pneumatic transport systems suitable to sensitive products as medicines, food or similar
Full system manufacture also takes place with complete engineering and turnkey services
Installation and Commissioning is performed by trained field technicians with a well disciplined procedure of system pre start checks and close interaction with the end user. User training in maintenance and system operation is provided in detail.
Record keeping is very comprehensive and all aspects of a system performance are maintained in a central electronic data base. A similar record of replacement parts for each system is also maintained for review to check overall system performance and economy.
Maintenance Retraining is offered for office based tutorials and hands on practical courses.
Specializes in pneumatic conveying of dry bulk solids materials for the processing industries.
Some common solids as flour, sugar, cement and many more, can be suspended and transported in air - referred as pneumatic conveying. A pneumatic conveying system may transport solids up to approximately 50 mm size. The powder or solid must be dry, with no more than 20% moisture and not sticking.
In a pneumatic conveying system, most of the energy is used for the transport of the air itself. The energy efficiency of a pneumatic conveying plant is therefore relatively low, but this is often outweighed by easy handling and, in well designed systems, dust free solutions.
In general the length of a pneumatic system should not extend 300 m for each pneumatic unit. The products can be conveyed over long distances by connecting the systems in series.
There are three basic designs of pneumatic transport systems:
Dilute phase conveying at a high gas speeds (20 - 30 m/s)
Strand conveying at a limited gas speeds (15 - 20 m/s)
Dense phase conveying at a low gas speeds (5 - 10 m/s)
Pneumatic systems can operate with both positive and negative pressures - vacuum. The working pressure should not extend 40 kN/m2.
The maximum temperature rise during pneumatic compression is seldom above 5oC, which makes pneumatic transport systems suitable to sensitive products as medicines, food or similar
Full system manufacture also takes place with complete engineering and turnkey services
Installation and Commissioning is performed by trained field technicians with a well disciplined procedure of system pre start checks and close interaction with the end user. User training in maintenance and system operation is provided in detail.
Record keeping is very comprehensive and all aspects of a system performance are maintained in a central electronic data base. A similar record of replacement parts for each system is also maintained for review to check overall system performance and economy.
Maintenance Retraining is offered for office based tutorials and hands on practical courses.
){kind=link}